| Hardware Specifications |
| Hardware version |
2 |
| Copper Ports |
4-port 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation |
| SFP Slots |
1 1000BASE-SX/LX/BX SFP interface
Compatible with 100BASE-FX SFP |
| Connector |
Removable 4-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for Power 2 |
| LED |
2 x LED for system and power: Green: DC Power 1 Green: DC Power 2 2 x LED for each copper port: Green: 1000Mbps LNK/ACT Amber: 10/100Mbps LNK/ACT 1 x LED for SFP fiber slot: Green: LNK/ACT |
| ESD Protection |
6KV |
| Power Requirements |
9~48V DC, redundant power with reverse polarity protection, 24V AC power support |
| Power Consumption / Dissipation |
2.4 watts/8.1BTU |
| Installation |
DIN-rail kit and wall-mount ear |
| Enclosure |
IP30 metal case |
| Dimensions (W x D x H) |
30 x 70 x 104 mm |
| Weight |
239g |
| Switch Specifications |
| Switch Processing Scheme |
Store-and-Forward |
| Address Table |
2K entries |
| Buffer Memory |
4M bits on-chip buffer memory |
| Flow Control |
Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
| Switch Fabric |
10Gbps |
| Throughput (packet per second) |
7.4Mpps@64bytes |
| Jumbo Frame |
9K |
| Network Cables |
10/100/1000BASE-T
Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters)
EIA/TIA-568 100-ohm STP (max. 100 meters) |
| Standards Conformance |
| Standards Compliance |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service |
| Regulatory Compliance |
FCC Part 15 Class A, CE |
| Stability Testing |
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration) |
| Environment |
| Temperature |
Operating: -40~75 degrees C
Storage: -40~75 degrees C |
| Humidity |
Operating: 5~90%, Storage: 5~90% (non-condensing) |